Ekofire Focal Point pilot assembly Part no: F730108 Copreci 21100 2F/297 ODS 400mm lead

NATURAL GAS ONLY

This pilot assembly type can be used in many Focal Point / Ekofires models, but it is not universally interchangeable across all Focal Point fires. 
You have to match it to the exact fire model and control type.

🔧 What you’ve got

Your part:

Ekofire / Focal Point pilot assembly
Part no: F730108
Copreci 21100 2F/297 ODS
400mm lead

That’s an ODS (oxygen depletion sensor) pilot assembly, which is a safety device that shuts the fire off if oxygen drops.

 Where this exact pilot is used

From manufacturer manuals:

The Copreci 21100 2F/297 ODS pilot is used across multiple Ekofires / Focal Point gas fires
The F730108 code specifically matches “Oxypilot 21100” assemblies used in several models

That means it’s commonly fitted in:

Ekofires / Focal Point

• 3000 series
  
• 4000 series
  
• Some wall inset and slimline gas fires
  
• Compatibility with Focal Point fires

Here’s the important bit:

Compatible if:

Your fire uses Copreci 21100 2F/297 ODS
It’s a natural gas model
Lead length (400mm) matches or is acceptable
Control type matches (manual / slide / remote)

 Not guaranteed if:

Your fire uses a different ODS type (e.g. SIT 9082, Copreci 2F/296, etc.)
LPG version (different pilot assemblies)
Different lead length needed (some are 900mm, etc.)
Older or non-Ekofires/Focal Point units

EKOFIRE MODELS : 4010, 4015, 3010,3015,3020,3025,3030,3035,3060,3065

Key Features & Benefits

Full OxyPilot Safety System : Unlike standard controls, this sensor actively monitors oxygen levels and cuts the fuel supply if a drop is detected. Benefit: Absolute peace of mind and guaranteed indoor air safety, eliminating the worry of incomplete combustion.

Technical Snapshot

Control Type: Full OxyPilot (Pilot ignition with oxygen depletion sensor)

Efficiency: A-rated for energy efficiency

Irish Home Heating – Ultimate Safety & Control

ALWAYS CONFIRM THE REQUIRED PART WITH YOUR REGISTERED GAS INSTALLER. GAS PARTS  CAN ONLY BE INSTALLED LEGALLY BY A QUALIFIED , COMPETENT AND APPROVED REGISTERED GAS INSTALLER IN IRELAND 

⚠️ Note for Irish Installers
As per the manufacturer's installation instructions, this part appliance is approved for use in the Republic of Ireland. Installers must adhere to the local ventilation rules in force as outlined in the technical spec